ADTRAN 1000R Series debug ip tcp md5

Command Reference Guide Enable Mode Command Set

debug ip tcp md5

Use the debug ip tcp md5 command to activate debug messages that detail the results of each incoming

Transmission Control Protocol (TCP) packet’s MD5 authentication with an internal route in the AOS.

Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this

command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series

units.

Command History

Release 9.1 Command was introduced.

Functional Notes

Debug messages will only be generated for TCP ports that have MD5 authen tic at ion ena b led .

Usage Examples

The following example activates debug messages associated with incoming TCP packet’s MD5 authentication:

>enable

#debug ip tcp md5