ADTRAN 1000R Series show power inline <slot/port> [realtime]

Command Reference Guide Enable Mode Command Set

show power inline <slot/port> [realtime]

Use the show power inline command to display power information (in watts) for devices connected to

power over Ethernet (PoE) interfaces. The command also displays the PoE interfaces that can be powered,

whether the interfaces are powered or not, and the IEEE class for the device(s) connected to the PoE

interfaces.

Syntax Description

<slot/port> Optional. Sp ecifies the slot/port of a PoE interface . If specified, the command only

displays information related to that interface.

realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 1000 and 1000R series units.

Command History

Release 9.1 Command was introduced.

Release 11.1 The real time display option was added.

Functional Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

318).

Usage Examples

The following example displays power infor mation for all PoE interfaces:

>enable

#show power inline

Interface Admin Oper Power Class

(watts)

eth 0/1 auto off n/a n/a