ADTRAN 1000R Series clear lldp counters

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 65
clear lldp counters
Use the clear lldp counters command to reset all local loop demarkation point (LLDP) pack et c ounters to
zero on all interfaces.
Syntax Description
No subcommands.
Default Values
There are no default settings for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example resets all LLDP counters:
>enable
#clear lldp counters