ADTRAN 1000R Series clear pppoe <interface id>

Command Reference Guide Enable Mode Command Set

clear pppoe <interface id>

Use the clear pppoe command to terminate the current PPPoE client session and cause the AOS to attempt

to re-establish the session.

Syntax Description

<interface id> Specifies the PPP interface ID number to clear.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example ends the current PPPoE client session for ppp 1:

>enable

#clear pppoe 1