ADTRAN 1000R Series area <area id> range <ip address> <network mask> [advertise

Command Reference Guide Router (OSPF) Configuration Command Set

area <area id> range <ip address> <network mask> [advertise |

Use the area range command to configure area route summarizations and to determine whether an address

range is advertised to the networks.

Syntax Description

<area id> Specifies an identifier for this area. Specifies as an integer (range: 0 to

4,294,967,295) or an IP address <A.B.C.D>.

<ip address> Specifies the IP address of the advertised summary route.

<network mask > Specifies the mask of the advertised summary route.

advertise Specifies the specified address range will be advertised to other networks.

not-advertise Specifies the specified address range will not be advertised to other networks.

Default Values

By default, OSPF is not enab le d.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Usage Examples

The following example defines an address range for a spec ific are a that allows the unit to advertise this

range to other networ ks:

(config)#router ospf

(config-ospf)#area 11.0.0.0 range 11.0.0.0 255.0.0.0 advertise