ADTRAN 1000R Series certificate <serial-number>

Command Reference Guide Certificate Config uration Command Set

certificate <serial-number>

Use the certificate command to restore a certificate. Use the no form of this command to remove a specific

certificate from the certificate chain.

Syntax Description

<serial-number> Specifies the certificate’s seria l number (up to 51 characters). This value can be

found for existing certificates by using the show run command.

Default Values

No default s necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The user typically does not enter this command. It is primarily used to restore certificates from the startup

configuration when the product is powered up.

Usage Examples

The following example removes the certificate with the serial number

73f0bfe5ed8391a54d1214390a36cee7:

(config)#crypto ca certificate chain MyProfile

(config-cert-chain)#no certificate 73f0bfe5ed8391a54 d1214390a36cee7