ADTRAN 1000R Series ppp chap password <password>

Command Reference Guide PPP Interface Configuration Command Set

ppp chap password <password>

Use the ppp chap password command to configure an alternate password when the peer requires CHAP

PPP authentication. Use the no form of this command to remove a configured password. For more

information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp

authentication [chap | pap] on page 1094.

Syntax Description

<password> Specifies a password using an alphanumeric string up to 80 characters in length.

Default Values

By default, there is no defined PPP CHAP password.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example specifies a PPP CHAP password of my_password:

(config)#interface ppp 1

(config-ppp 1)#ppp chap password my_password