ADTRAN 1000R Series pppoe ac-name <name>

Command Reference Guide PPP Interface Configuration Command Set

pppoe ac-name <name>

Use the pppoe ac-name command to identify the Access Concentrator (AC) with which the AOS expects

to establish a PPPoE session. Use the no form of this command to return to the default setting.

Syntax Description

<name> Specifies an AC by text string (up to 255 characters ) co rr es po nd in g to th e

AC-Name Tag under RFC2 516. If this field is not specified, any access

concentrator is acceptable. The AC value may be a combination of trademark,

model, and serial ID information (or simply the MAC address of the unit).

Default Values

By default, no AC is specified.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example identifies the AC with which the AOS expects to establish a PPPoE session:

(config)#interface ppp 1

(config-ppp 1)#pppoe acc-name Access_Conc entrator_Name