Command Reference Guide Demand Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 833
Several examp le sce na r ios ar e giv en below fo r c lar ity.
Configuring CHAP Example 1: Only the loca l router requires the peer to authenticate itself.
On the local router (hostn ame Local):
Local(config-demand 1)#ppp authentication chap
Local(config-demand 1)#username Peer password same
On the peer (hostname Peer):
Peer(config-demand 1)#username Local password same
The first line of this configuration sets the authentication mode to CHAP. This means the peer is required to
authenticate itself to the local router via CHAP. The second line is the username and password expected to
be sent from the peer. The peer must also have the username up both to verify the incoming username
from the local router and to use the p asswor d (along with it s ho stname) in the response to th e local router.
Configuring CHAP Example 2: Both routers require the peer to authenticate itself.
On the local router (hostn ame Local):
Local(config-demand 1)#ppp authentication chap
Local(config-demand 1)#username Peer password same
On the peer (hostname Peer):
Peer(config-demand 1)#ppp authentication chap
Peer(config-demand 1)#username Local password same
This is basically identical to Example 1 except that both routers will now challenge each other and
respond.
Configuring CHAP Example 3: Using the ppp chap hostname command as an alternate solution.
On the local router (hostn ame Local):
Local(config-demand 1)#ppp authentication chap
Local(config-demand 1)#username Peer password same
Local(config-demand 1)#ppp chap hostname nearend
On the peer (hostname Peer):
Peer(config-demand 1)#username nearend password same
Notice the peer is expecting username “nearend” even though the local router's hostname is “Local.”
Therefore the local router can use the ppp chap hostname command to send the correct name on the
challenge.
The PPP username and password database is separate and distinct from the global
username password database. For PAP and CHAP, use the database under the PPP
interface configuration.