ADTRAN 1000R Series

Command Reference Guide ATM Sub-Interfa c e Config Command Set

qos-policy out <mapname>

Use the qos-policy out command to apply a previously-configured QoS map to an interface. Use the no

form of this command to remove the map from the interface. The keyword out specifies that this policy

will be applied to outgoing packets.

Syntax Description

<mapname> Specifies the name of a previously-created QoS map (refer to qos map

<mapname> <sequence number> on page 488 for more info rmation).

Default Values

No default value is necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 6.1 Command was introduced.

Release 8.1 ATM sub-interface was added.

Functional Notes

When a QoS policy is applied to an interface, it may be disab led if the inter face bandwidth is not adequate

to support the requested bandwidth on the map set. Once the bandwidth probl em is resolved, the map will

work again. The bandwidth will be rechecked on any of the following changes:

1. A priority or class-based entry is added to, deleted from, or changed in a QoS map set.

2. The interface bandwidth is changed by the bandwidth command on the inter face.

3. A QoS policy is applied to an interface.

4. A cross-connect is created that includes an interface with a QoS policy.

5. The interface queuing method is changed to fair-queue to use weighted fair queuing.

6. The interface operational status changes.

7. The interface bandwidth changes for other reasons (e.g., when ADSL finishes training).

In order to prevent the map from being disabled in cases of temporary inadequate band width (e.g., a single

link goes down in a dual T1 multilink configuration where the map requests more than one T1's worth of

bandwidth), the QoS ma p us es th e ma xim u m th eo re ti cal bandwidth on an interface, not the actual

bandwidth at that time. This actually helps QoS keep higher priority class-based tr affic wor king better than

best-effort traffic when the bandwidth drops.