ADTRAN 1000R Series bonding txnull-timer <seconds>

Command Reference Guide BRI Interface Configuration Command set

bonding txnull-timer <seconds>

Use the bonding txnull-timer command to specify the value (in seconds) for the answering endpoint

negotiation timeout. Use the no form of this command to return to the default value.

Syntax Description

<seconds> Specifies the number of seconds the endpoint waits to detect the bonding

negotiation frame pattern from the origin ating endpoint (after answering a call)

before considering th e bonding negotiation a failure.

Default Values

By default, the bonding txnull-timer value is 10 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Functional Notes

S pecifies the len gth of time the answering endpoint attempt s to detect the bond ing negotiation p attern from

the originating endpoint before deciding the bonding call has failed. It may be necessary to shorten this

timer if the DTE equipment using the bonding module also ha s timer constraints for completing

non-bonding parameter negotiation.

Usage Examples

The following example defines a bonding txnull-timer value of 8 seconds:

(config)#interface bri 1/2

(config-bri 1/2)#bonding txnull-timer 8