ADTRAN 1000R Series - page 616

Command Reference Guide Ethernet Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 616
arp arpa
Use the arp arpa command to enable address resolution protocol (ARP) on the Ethernet interface.
Syntax Description
arpa Sets standard address resolution protocol for this interface.
Default Values
The default for this command is ar pa.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 a nd Total Access
900 Series units.
Command History
Release 3.1 Command was introduced.
Release 5.1 Command was expanded to includ e Ethernet su b-interfac es and Gigabit Ethe rnet
interfaces.
Usage Examples
The following example enables standard ARP for the Ethernet interface:
(config)#interface eth 0/1
(config-eth 0/1)#arp arpa