ADTRAN 1000R Series - page 285

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 285
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000
and Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Release 9.1 Command was expanded to include HDLC and tunnel interfaces.
Release 11.1 Demand, FXO, and serial interfaces were added. IP crypto and router pim- sparse
key words were added.
Usage Examples
The following is a sample output from the show running-config command:
>enable
#show running-config
Building configuration...
!
no enable password
!
ip subnet-zer o
ip classless
ip routing
!
event-his to ry on
no logging forwarding
logging forwarding priority-level info
no logging email
!
ip policy-timeout tcp all-port s 600
ip policy-timeout udp all-ports 60
ip policy-timeout icmp 60
!
interface eth 0/1........