ADTRAN 1000R Series show ip prefix-list [detail | summary] <listname>

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 237
show ip prefix-list [detail | summary] <listname>
Use the show ip prefix-list command to display BGP prefix list information.
Syntax Description
detail Shows a listing of the prefix list rules and their hit counts.
summary Shows information about the entire prefix list.
<listname> Shows information for a spec ific prefix list.
Default Values
No default values are necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
If the show ip prefix-list command is issued with no arguments, a listing of the prefix-list rules but no hit
count statistics is displayed.
Usage Examples
The following example displays information about the prefix list test.
>enable
#show ip prefix-list test
ip prefix-list test: 4 entries
seq 5 permit 0.0.0.0/0 ge 8 le 8
seq 10 deny 0.0.0.0/0 ge 9 le 9
seq 15 permit 0.0.0.0/0 ge 10 le 10
seq 20 deny 0.0.0.0/0 ge 11