ADTRAN 1000R Series ip policy route-map <mapname>

Command Reference Guide Demand Interface Configuration Command Set

ip policy route-map <mapname>

Use the ip policy route-map command to associate a route map with a network interface source. Use the

no form of this command to disable this feature.

Syntax Description

<mapname> Specifies the route map to associate with this interface.

Default Values

By default, policy-based routing is disabled for all interfaces.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example associates the route map named MyMap with demand interface 1:

(config)#interface demand 1

(config-demand 1)#ip policy route-map MyMap