ADTRAN 1000R Series

Command Reference Guide Frame Relay Sub-Interface Config Command Set

dial-backup auto-backup

Use the dial-backup auto-backu p command to configure the Frame Relay sub-interface to automatically

attempt a dial-backup upon failure. For more detailed information on Frame Relay dial-backup

functionality, refer to the Functional Notes and Technology Review sections of d ial-backup call-mode

[answer | answer-always | originate | originate-answer | originate-answer-always] on page 876.

Syntax Description

No subcommands.

Default Values

By default, all backup endpoints will automatically attempt dial-backup upon a failure.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1 Command was introduced.

Usage Examples

The following example enable s automatic dial-backup on the endpoint:

(config)#interface frame-relay 1.16

(config-fr 1.16)#dial-backup auto-backup