ADTRAN 1000R Series show access-lists <listname>

Command Reference Guide Enable Mode Command Set

show access-lists <listname>

Use the show access-lists command to display all configured access lists in the system (or a specific list).

Syntax Description

<listname> Optional.

Specifies a particular access list to display.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 2.1 Command was introduced.

Functional Notes

The show acces s-lists command displays all configured access lists in the system. All entries in the

access list are displayed, and a counter indicating the number of packets matching the entry is listed.

Usage Examples

The following is a sample output from the show access-lists command:

>enable

#show access-lists

Standard access list MatchAll

permit host 10.3.50.6 (0 matches)

permit 10.20 0. 5. 0 wildcard bits 0.0.0.255 (0 ma tch es )

extended access list UnTrusted

deny icmp 10.5.60.0 wildcard bits 0.0.0.255 any source-quench (0 matches)

deny tcp any (0 mat c h es )