ADTRAN 1000R Series show memory [heap | realtime

Command Reference Guide Enable Mode Command Set

show memory [heap | realtime | uncached-heap]

Use the show memory command to display statistics regarding memory including memory allocation and

buffer use statistics. Shows how memory is in use (broken down by memory size) and how much memory

is free.

Syntax Description

heap Shows how much memory is in use (b roken down by memory block size) and how

much memory is free.

uncached-heap Shows how much memory has been set aside to be used without memory

caching, how much memory is being used and how much memory is free . (Valid

only on NetVanta 300, 1000, and 1000R Series Units.)

realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 3.1 Command was introduced.

Release 10.1 Realtime option was intr oduced.

Release 11.1 Uncached heap option was introduced.

Functional Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

318).