ADTRAN 1000R Series spanning-tree edgeport bpdufilter default

Command Reference Guide Global Configuration Mode Command Set

spanning-tree edgeport bpdufilter default

Use the spanning-tree edgeport bpdufilter default command to enable the BPDU filter on all ports by

default. Use the no form of this command to disable the setting.

Syntax Description

No subcommands.

Default Values

Disabled by default.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The BPDU filter blocks any BPDUs from being transmitted and received on an interface. This can be

overridden on an individual port.

Usage Examples

The following example enable s the bpdufilter on all port s by default:

(config)#spanning-tree edgeport bpdufilter default

To disable the BPDU filter on a specific interface, issue the appropriate commands for the given interface

using the following comma nds as an example:

(config)#interface ethernet 0/1

(config-eth 0/1)#spanning-tree bpdufilter disable