ADTRAN 1000R Series

Command Reference Guide Tunnel Configuration Command Set

ip rip receive version [1 | 2]

Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets

received on the interface. Use the no form of this command to restore the default value.

Syntax Description

Only accept received RIP version 1 packets on the interface.

Only accept received RIP version 2 packets on the interface.

Default Values

By default, all interfaces implement RIP version 1 (the default value for the version command).

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 9.1 Command was introduced.

Functional Notes

Use the ip rip receive version command to specify a RIP version that overrides the version (in the

Router RIP) configuration. See version [1 | 2] on page 1326 for more information.

The AOS only accepts one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the tunnel interface to accept only RIP version 2 p ackets:

(config)#interface tunnel 1

(config-tunnel 1)#ip rip receive version 2