ADTRAN 1000R Series

Command Reference Guide Demand Interface Configuration Command Set

username <username> password <password>

Configures the username and password of the peer to use for demand authentication.

Syntax Description

<username> Specifies a username by alphanumerical string up to 30 characters in length (the

username is cas e- se nsitive).

<password> Specifies a password by alphanumerical string up to 30 characters in length (the

password is case-sensitive).

Default Values

By default, there is no established username and password.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1 Command was introduced.

Release 11.1 Command expanded to include the demand interface.

Functional Notes

PAP uses this entry to check received info rmation from the peer. CHAP uses this entry to check the

received peer hostname and a common password.

Usage Examples

The following example creates a username of ADTRAN with password ADTRAN for the demand link

labeled 5:

(config)#interface demand 5

(config-demand 5)#username ADTRAN password ADTRAN