ADTRAN 1000R Series - page 626

Command Reference Guide Ethernet Interface Configuration Command Set
61200510L1-35E Copyright © 2005 ADTRAN 626
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000
and Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example configures Ethernet interface 0/1 to re ceive LLDP packets:
(config)#interface eth 0/1
(config-eth 0/1)#lldp receive