ADTRAN 1000R Series

Command Reference Guide VLAN Interface Config Command Set

crypto map <mapname>

Use the crypto map command to associate crypto maps with the interface.

Syntax Description

<mapname> Specifies the crypto map name that you wish to assign to the interface.

Default Values

By default, no crypto maps are assigned to an interface.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, and 2000 Series units.

Command History

Release 4.1 Command was introduced.

Functional Notes

When configuring a system to use both the stateful inspection firewall and IKE negotiation for VPN, keep

the following notes in mind.

When defining the policy-cl ass and associated access-control lists (ACLs) that describe the beha vior of the

firewall, do not forget to include the traffic coming into the system over a VPN tunnel terminated by the

system. The firewall should be set up with respect to the unencrypted traffic that is destined to be sent or

received over the VPN tu nn el. The follo win g dia gra m re pr es en ts typical AOS data-flow logic.

When you apply a map to an interface, you are applying all crypto maps with the given

map name. This allows you to apply multiple crypto maps if you have created maps which

share the same name but have different map index numbers.

For VPN configuration example scripts, refer to the technical support note

Configuring VPN located on the ADTRAN OS Documentation CD provided with your

unit.