ADTRAN 1000R Series set precedence <0-7>

Command Reference Guide Quality of Service (QoS) Map Commands

set precedence <0-7>

The set precedence command is an optional command for a QoS map that can be used to modify the IP

precedence value (on matching packets) to the specified value.

Syntax Description

<0-7> Specifies the decimal IP precedence value.

Default Values

No default value is necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 6.1 Command was introduced.

Usage Examples

This command set s the IP precedence value (for all matching traffic) to 5:

(config)#qos map VOICEMAP 10

(config-qos-map)#set precedence 5