ADTRAN 1000R Series caller-number <CLID number>

Command Reference Guide Demand Interface Configuration Command Set

caller-number <CLID number>

Use the caller-number command to link calls to specific interfaces based on it’s caller ID (CLID) number.

Multiple caller ID numbers may be specified, allowing the interface to accept calls from different remote

resources. Use the no form of this command to restore the default values.

Syntax Description

<CLID number> Identifies the caller’s number to be linked to an interface. The CLID number is

limited to 20 digits.

Default Values

By default, no caller numbers are defined.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example links calls with a CLID number of 2565559911 to the demand interface 1:

(config)#interface demand 1

(config-demand 1)#ca ller-number 2565559911