ADTRAN 1000R Series debug spanning-tree bpdu [receive | transmit

Command Reference Guide Enable Mode Command Set

debug spanning-tree bpdu [receive | transmit | all]

Use the debug spanning-tree bpdu command to display bridge protocol data unit (BPDU) debug

messages. When enabled, a debug message is displayed for each BPDU packet that is transmitted or

received by the unit. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the

no form of this command to disable the debug messages.

Syntax Description

receive Displays debug messages for BPDU packets received by the unit.

transmit Displays debug messages for BPDU packets transmitted by the unit.

all Displays debug messages for BPDU packet s that are transmitted and received by

the unit.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Usage Examples

The following example displays debug messages for BPDU packets that are transmitted and received by

the unit:

>enable

#debug spanning-tree bpdu all