ADTRAN 1000R Series ip dhcp-server pool <name>

Command Reference Guide Global Configuration Mode Command Set

ip dhcp-server pool <name>

Use the ip dhcp-server pool command to create a DHCP address pool and enter the DHCP pool. Use the

no form of this command to remove a configured DHCP address pool. Refer to the section DHCP Pool

Command Set on page 1327 for more information.

Syntax Description

<name> Identifies the co nfigur ed DHCP serv er ad dr ess poo l usin g a n al phanu mer ic str ing

(up to 32 characters in length).

Default Values

By default, there are no configured DHCP address pools.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 9 00 Series units.

Command History

Release 2.1 Command was introduced.

Functional Notes

Use the ip dhcp-server pool to create multiple DHCP server address pools for various segments of the

network. Multiple address pools can be created to service different segments of the network with tailored

configurations.

Usage Examples

The following example creates a DHCP server address pool (labeled SALES) and enters the DHCP server

pool mode:

(config)#ip dhcp-server pool SALES

(config-dhcp)#