ADTRAN 1000R Series

Command Reference Guide ATM Sub-Interfa c e Config Command Set

ip rip send version [1 | 2]

Use the ip rip send version command to configure the RIP version the unit sends in all RIP packets

transmitted on the interface. Use the no form of this command to restore the default value.

Syntax Description

1Transmits only RIP version 1 packets on the interface

2Transmits only RIP version 2 packets on the interface

Default Values

By default, all interfaces transmit RIP version 1 (the default value for the version command).

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.

Command History

Release 1.1 Command was introduced.

Release 8.1 ATM sub-interface was added.

Functional Notes

Use the ip rip send versio n to specify a RIP version that will override the version (in the Router RIP)

configuration.

The AOS only transmits one version (either 1 or 2) on a given interface.

Usage Examples

The following example configu res the ATM sub-interface 1.1 to transmit only RIP version 2 packets:

(config)#interface atm 1.1

(config-atm 1.1)#ip rip send version 2