ADTRAN 1000R Series certificate ca <serial-number>

Command Reference Guide Certificate Config uration Command Set

certificate ca <serial-number>

Use the certificate ca command to restore a CA certificate. Use the no form of this command to remove a

specific certificate from the certificate chain for a CA.

Syntax Description

<serial-number> Specifies the certificate’s seria l number (up to 51 characters). This value can be

found for existing certificates by using the show run command.

Default Values

No default s necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 5.1 Command was introduced.

Functional Notes

The user typically does not enter this command. It is primarily used to restore certificates from the startup

configuration when the product is powered up.

Usage Examples

The following example removes the CA certificate with the serial number 0712:

(config)#crypto ca certificate chain MyProfile

(config-cert-chain)#no certificate ca 0712