ADTRAN 1000R Series connect-sequence

Command Reference Guide Demand Interface Configuration Command Set

connect-sequence

Use the connect-sequence command to provide instructions to the interface on how to use the resource

pool and telephone numbers to connect to demand destinations. Use the no form of this command to

restore the default values.

Variations of this command include the following:

connect-sequence <sequence number> dial-string <string> forced-analog

connect-sequence <sequence number > dial-string <string> forced-analog busy out-threshold <value>

connect-sequence <sequence number> dial-string <string> forced-isdn-56k

busyout-threshold <value>

connect-sequence <sequence number> dial-string <string> forced-isdn-64k

busyout-threshold <value>

connect-sequence <sequence number> dial-string <string> isdn-56k

connect-sequence <sequence number> dial-string <string> isdn-56k busyout-threshold <value>

connect-sequence <sequence number> dial-string <string> isdn-64k

connect-sequence <sequence number> dial-string <string> isdn-64k busyout-threshold <value>

Syntax Description

<sequence number> Specifies the number for this connection spe cification entry. Range: 1 to 65,535.

<string> Specifies the telephone number to dial when using this connection. The dial

string is limited to 20 digits.

forced-analog Specifies that only analog resources may be used.

forced-isdn-56k S pe cifie s that only ISDN reso urces may be used . Call is p laced using ISDN 56k.

forced-isdn-64k S pe cifie s that only ISDN reso urces may be used . Call is p laced using ISDN 64k.

isdn-56k Specifies any dial resource may be used if ISDN 56k call-type is used.

isdn-64k Specifies any dial resource may be used if ISDN 64k call-type is used.

busy-threshold <value> Optional. Specifies the maximum number of connect sequence cycles during a

activation attempt that must fail before it is skipped until the next activation

attempt.

Default Values

By default any dial resource may be used.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 11.1 Command was introduced.