ADTRAN 1000R Series redistribute ospf [metric <value>]

Command Reference Guide Router (RIP) Configuration Command Set

redistribute ospf [metric <value>]

Use the redistribute ospf command to advertise routes from one protocol to another, regardless of the

routing protocol implemented on the routing domain. Using the ospf keyword allo ws the prop ag ation of

OSPF routes into RIP. Use the no form of this command to disable the propagation of the specified route

type.

Syntax Description

metric

<value> Optional.

Spe cifies the ho p co unt to use fo r advertising redistributed OSPF routes

in RIP.

Default Values

By default, this command is disabled.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Functional Notes

Redistributing OSPF routes impor ts those routes into RIP without the interfaces in question actually

participating in RIP. The OSPF routes imported this way are not covered by a network command and

therefore do not send/receive RIP traffic.

If redistribute ospf is enabled and no metric value is specified, the value defaults to 0. The metric value

defined using the redistribute ospf metric command ov er rid es the default-metric command’s metric

setting. Refer to the section timeout-timer <seconds> on page 1324 for more information.

Usage Examples

The following example imports OSPF routes into RIP:

(config)#router rip

(config-rip)#redistribute ospf