ADTRAN 1000R Series

Command Reference Guide HDLC Command Set

dial-backup redial-delay <seconds>

Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call

will be re-tried. For more detailed information on PPP dial-backup functionality, refer to the Functional

Notes and Technology Review sections of the command dial-backup call-mode [answer | answer-always |

originate | originate-answer | originat e-answer-always] on page 939.

Syntax Description

<seconds> Specifies the delay in seconds between attempting to re-dial a failed backup

attempt. Range: 10 to 3600.

Default Values

By default, dial-backup redial-delay is set to 10 seconds.

Applicable Platforms

This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.

Command History

Release 1.1 Command was introduced.

Release 5.1 Command was expanded to include the PPP interface.

Usage Examples

The following example configures a redial delay of 25 seconds on this endpoint:

(config)#interface ppp 1

(config-ppp 1)#dial-backup redial-delay 25