ADTRAN 1000R Series aaa group server [radius

Command Reference Guide Global Configuration Mode Command Set

aaa group server [radius | tacacs+] <listname>

Use the aaa group server command to group pre-define d RADIUS and TACACS+ servers into named

lists. For more detailed information on AAA functionality, refer to the Technology Review section of the

command aaa on on page 340.

Syntax Description

radius Groups defined RADIUS servers.

tacacs+ Groups TACACS+ server.

<listname

Specifies the name of the list.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 5.1 Command was introduced.

Release 11.1 TACACS+ server support was added.

Functional Notes

Use the radius-server command to specify RADIUS ser vers before adding them to a group. Likewise, use

the tacacs-server command to specify TACACS+ servers before adding them to a group. These

commands enter a mode for adding individual servers to the named group. Refer to Radius Group

Command Set on page 1351 or TACACS+ Group Configuration Command Set on page 1363 for more

information.

The default group cannot b e changed and inclu des all RADIUS servers in the order they were specified by

the radius-server commands. The same is true of TACACS+ servers specified by the tacacs-server

commands.