ADTRAN 1000R Series domain-name <domain>

Command Reference Guide DHCP Pool Command Set

domain-name <domain>

Use the domain-name command to specify the domain name for the Dynamic Host Configuration

Protocol (DHCP) client. Use the no form of this command to remove the configured domain name .

Syntax Description

<name> Identifies the DHCP client (e.g., adtran.com) using an alphanumeric string (up to

32 characters in length).

Default Values

By default, there are no specified domain names.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 2.1 Command was introduced.

Usage Examples

The following example specifies a domain name of adtran.com:

(config)#ip dhcp-server pool MyPool

(config-dhcp)#domain-name adtran.com