ADTRAN 1000R Series - page 897

Command Reference Guide Frame Relay Sub-Interface Config Command Set
61200510L1-35E Copyright © 2005 ADTRAN 897
INTERFACE SPECIFIC INFO is only used for Frame Relay interfaces and can be
determined using the following:
FR_PORT#: Q.922 ADDRESS
Where the FR_PORT# specifies the label assigned to the vir tual Frame Relay
interface using four hexadecimal bytes. For example, a virtual Frame Relay
interface labeled 1 would have a FR_PORT# of 00:00:00:01.
The Q.922 ADDRESS field is populated using the following:
Where the FECN, BECN, C/R, DE, and high orde r extended addre ss (EA) bit s are
assumed to be 0 and the lower order EA bit is set to 1.
The following list provides a few example DLCIs and associated Q.922 address:
DLCI (decimal) / Q.922 address (hex)
16 / 0x0401
50 / 0x0C21
60 / 0x0CC1
70 / 0x1061
80 / 0x1401
hostname Optional. By default, the host name is the name configured using the Global
Configuration hostname command.
<“string”> By default, the host name is the name configured using the Global Configuration
hostname command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 2.1 Command was introduced.
DLCI (high order)
DLCI (lower) EA
EA
DE
C/R
FECN BECN
876 5 4 3 2 1