ADTRAN 1000R Series port-auth re-authentication

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 483
port-auth re-authentication
Use the port-auth re-authentication command to enable re-authentication.
Syntax Description
No subcommands necessary.
Default Values
By default, re-authentication is disabled.
Applicable Platforms
This command applies to the NetVanta 1000 and 1000R Series units.
Command History
Release 10.1 Command was introdu ced.
Usage Examples
The following example enables re-authentication:
(config)#port-auth reauthentication