ADTRAN 1000R Series show connections

Command Reference Guide Enable Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 170
show connections
Use the show connections command to display information (including TDM group assignments) for all
active connections.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000, and 5000 and Total Access 900 Series
units.
Command History
Release 7.1 Command was introduced.
Usage Examples
The following is sample output from the sh ow connections command:
>enable
#show connections
Displaying all connections....
Conn ID
From
To
1
ppp 1
e1 1/1, tdm-group 1