ADTRAN 1000R Series snmp-server location <string>

Command Reference Guide Global Configuration Mode Command Set
61200510L1-35E Copyright © 2005 ADTRAN 508
snmp-server location <“string”>
Use the snmp-server location command to specify the Simple Network Management Protocol (SNMP)
system location string. Use the no form of this command to return to the default value.
Syntax Description
<“string”> Populates the system locatio n string using an alphanumeric string enclosed in
quotation marks (up to 32 characters in length).
Default Values
By default, the sn mp-server location is set to ADTRAN.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 9 00 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example specifies a location of 5th Floor Network Room :
(config)#snmp-server location “5th Floor Network Room”