ADTRAN 1000R Series area <area id> default-cost <value>

Command Reference Guide Router (OSPF) Configuration Command Set

area <area id> default-cost <value>

Use the area default-cost command to assign a cost of the default summary route sent into a stub area or

not-so-stubby-area (NSSA). Use the no form of this command to delete the assigned cost.

Syntax Description

<area id> Specifies the identifier for this area. Specifies as an integer (range: 0 to

4,294,967,295) or an IP address <A.B.C.D>.

<value> Specifies the default summary route cost. Range: 0 to 166,777,214.

Default Values

By default the summary route cost is set to 0. There is no default for the area ID.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 3.1 Command was introduced.

Usage Examples

The following exam ple de fine s a de fa ult cost of 85 to a sp ec ific area :

(config)#router ospf

(config-ospf)#area 192.22.72.0 default -cost 85