4-42
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter4 Configuring VISM Features
Configuring VISM Features
Step 2 Type the cnfprofelemvoice command, profile-type, profile-num, codec-type, pvoice-pkt-period, and sid
argument values, and press Enter to configure the voice profile element for a specified profile. Specify
the arguments with the following values:
•profile-type: Refer to the options listed in Step 1.
•profile-num: Refer to the options listed in Step 1.
•codec-type argument values:
–
1 = G.711u
–
2 = G.711a
–
3 = G.726-32k
–
4 = G.729a
–
5 = G.729ab
–
6 = Clear channel (VAD must be off)
–
7 = G.726-16k
–
8 = G.726-24k
–
9 = G.726-40k
–
11 = G.723.1-H
–
12 = G.723.1a-H
–
13 = G.723.1-L
–
14 = G.723.1a-L
•pvoice-pkt-period (defined in milliseconds):
–
5
–
10
–
20
–
30
–
40
–
60
•sid:
–
1 = VAD off
–
2 = VAD on
–
3 = SID generic
–
4 = SID 729
–
5 = SID 723
Step 3 Type the cnfprofelemvbd command, profile-type, profile-num, codec-type, and vbd-pkt-period
argument values, and press Enter to configure the v oiceband data e lement for a specif ied profile. Specify
the arguments with the following values:
•profile-type—Refer to the options listed in Step 1.
•profile-num—Refer to the options listed in Step 1.
•vbd-codec-type—Refer to the options listed in Step 2.
•vbd-pkt-period (defined in milliseconds):