5-105
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcaspackage
cnfcaspackage
To configure the Media Gateway Control Protocol (MGCP) packages to notify persistent obser ved
channel associated signaling (CAS) events in the context of incoming and outgoing CAS calls on a
specified endpoint, use the cnfcaspackage command in the VoIP switching/trunking, switched AAL2
PVC, and AAL2 trunking operating modes.
cnfcaspackage endpt-num in-package out-package
Syntax Description endpt-num The endpoint number which is to be configured with the source locatio n. It ca n
be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144