5-471
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpdetailcnt
dspxgcpdetailcnt
To display Simple Gateway Control Protocol (SGCP)/Media Gateway Control Protocol (MGCP) details
of message statistics exchanged between VISM and a specified call agent, use the dspxgcpdetailcnt
command in the VoIP switching/trunking operating mode.
dspxgcpdetailcnt ca-ip-address
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the SGCP/MGCP details of message statistics exchanged between
VISM and the call agent identified by the IP address are displayed:
dspxgcpdetailcnt 209.165.200.224
IP Address : 209.165.200.224
CRCX Count : 0
CRCX Fail Count : 0
MDCX Count : 0
MDCX Fail Count : 0
DLCX Received Count : 0
DLCX Received Fail Count : 0
DLCX Sent Count : 0
DLCX Sent Fail Count : 0
RQNT Count : 0
RQNT Fail Count : 0
Notify Count : 0
Notify Fail Count : 0
Audit Endpoint Count : 0
Audit Endpoint Fail Count : 0
Audit Connection Count : 0
Audit Connection Fail Count : 0
RSIP Count : 4
RSIP Fail Count : 4
Related Commands
ca-ip-address IP address of the call agent for which you want to display detailed exchanged
message statistics. It can be in dotted decimal format (nnn.nnn.nnn.nnn).
Command Description
dspxgcpdetailcnts Displays SGCP/MGCP details of message statistics exchanged between VISM
and all known call agents.