5-30
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
addmgcgrpentry
addmgcgrpentry
To configure a call agent as part of a media gateway controller (MGC) redundancy gro up an d assi gn a
priority value for the call agent, use the addmgcgrpentry command in the VoIP switching/trunking and
switched AAL2 PVC operating modes.
addmgcgrpentry mgc-group mgc-num mgc-preference
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines You must add a call agent to a call agent redundancy group regardless of the absence of additional call
agents in the redundancy group.
Use the dspmgcgrpparams command to verify call agent redundancy group configuration data.
Examples The following example shows that call agent redundancy g rou p n um ber 1 i s co nfigured wi th t he ca ll
agent number 5, and assigned a priority level of 3:
addmgcgrpentry 1 5 3
Related Commands
mgc-group Call agent redundancy group number. It can be in the range from 1 to 8.
mgc-num Call agent identification number. It can be in the range from 1 to 8.
mgc-preference Call agent preference value—The preference of the MGC with in th e
group. It can be in the range from 1 (highest) to 8 . ( D efau lt = 1)
Command Description
addmgcgrpprotocol Associates a call agent redundancy group to a gateway control protoco l.
cnfmgcgrpentry Modifies the call agent priority level of a call agent within a call agent
redundancy group.
cnfmgcgrpparam Modifies a call agent redundancy group state change notification policy
and priority level.
cnfsrcppeer Configures the SRCP parameters when SRCP is the selected protocol for
communication between the VISM card and call agent.
cnfsrcppeergrpparam Modifies the SRCP heartbeat interval and maximum UDP size for a
specified call agent redundancy group.
delmgcgrpentry Deletes a call agent from a call agent redundancy group.
delmgcgrpprotocol Deletes an MGCP from a specified call agent redundan cy group .
dspmgcgrpparams Displays all configured call agent redundancy group parameters.
dspmgcgrpprotocols Displays all configured call agent redundancy group protocols.
dspmgcgrps Displays all configured call agent redundancy groups.
dspsrcppeergrpparams Displays the SRCP parameters for all call agent redundancy groups that
have SRCP added.