5-74
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfalmcnt
•CRC code violations encountered by the interface.
•CRC code violations in the last 15 minutes encountered by the interface.
•CRC code violations in the last 24 hours encountered by the interface.
•CRC code violated Errored Seconds encountered by the interface.
•CRC code violated Errored Seconds in the last 15 minutes encountered by the interface.
•CRC code violated Errored Seconds in the last 24 hours encountered by the interface.
•P Bit code violations Severely Errored Seconds encountered by the interface.
•CRC code violated Severely Errored Seconds in the last 15 minutes encountered by the interface.
•CRC code violated Severely Errored Seconds in the last 24 hours encountered by the interface.
•Severely Errored Framing Seconds encountered by the interface.
•Severely Errored Framing Seconds in the last 15 minutes encountered by the interface.
•Severely Errored Framing Seconds in the last 24 hours encountered by the interface.
•AIS Severely Errored Seconds encountered by the interface.
•AIS Severely Errored Seconds in the last 15 minutes encountered by the interface.
•AIS Severely Errored Seconds in the last 24 hours encountered by the interface.
•Unavailable Seconds encountered by the interface.
•Unavailable Seconds in the last 15 minutes encountered by the interface.
•Unavailable Seconds in the last 24 hours encountered by the interface.
•Percentage of LCV Error Free Seconds.
•Loss of Signal detected with or without integrating to LOS alarm.
•Out of Frame detected with or without integrating to OOF alarm.
•Yellow Alarms detected with or without integrating to RAI alarm.
•Framing Pattern Errors encountered by a DS1 interface.
Examples The following example shows that the TDM line statistics for major alarms are collected for l ine number
7:
cnfalmcnt -ds1 7 -sev 2
Related Commands Command Description
dspalmcnf Displays the threshold data about the alarm statistics being collected.
dspalmcnt Displays the alarm counters and statistics on a line.