5-93
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnfcasendpt
cnfcasendpt
To associate an endpoint with a channel associated signaling (CAS) variant name, use the cnfcasendpt
command in the VoIP switching/trunking operating mode.
cnfcasendpt endpt-num var-name
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines The endpoint and CAS variant must be previously added before you execute this command.
If there is no connection on an endpoint when the endpoint is associated with a CAS variant, use the
cnfcasendpt command again to change the CAS variant. However, if there is a connection on an
endpoint, you must delete the endpoint, add it back, and then execute the cnfcasendpt command to
change the CAS variant.
Examples The following example shows that endpoint number 3 is associ at ed wi th th e q50 .o CAS variant :
cnfcasendpt 3 q50.o
Related Commands There are no related commands.
endpt-num The endpoint number which is to be associated with the CAS variant identified by the
var-name argument value. It can be a value from one of the following ranges:
•For template number 1:
–
For VISM, from 1 to 145
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 2:
–
For VISM T1, from 1 to 192
–
For VISM E1, from 1 to 248
•For template number 3:
–
For VISM, from 1 to 120
–
For VISM-PR T1, from 1 to 192
–
For VISM-PR E1, from 1 to 248
•For template number 4:
–
For VISM-PR, from 1 to 144
var-name Name of the CAS variant; a text string from 1 to 64 alphanumeric characters.