5-318
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspcasxgcps
dspcasxgcps
To display timer parameters for the channel associated signaling/gateway control protocol (CAS/xGCP)
backhaul, use the dspcasxgcps command in the VoIP switching/trunking operating mode.
dspcasxgcps
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the CAS/xGCP backhaul timer p aramet ers ar e di splaye d:
dspcasxgcps
VariantName FileName ReXmitTime InitReXmitTime Retry
----------- -------- ----------- -------------- -----
first wink.dod 500 100 4
second ring.dod 500 100 4
Related Commands There are no related commands.