5-423
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspsesgrp
dspsesgrp
To display configuration data of a Primary Rate Interface (PRI) backhaul session group, u se the
dspsesgrp command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dspsesgrp group-num
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the PRI backhaul configuration data for session group number 2 is
displayed:
dspsesgrp 2
vismSessionGrpNum: 2
vismSessionGrpSetNum: 1
vismSessionGrpState: ?
vismSessionGrpCurrSession: 0
vismSessionGrpTotalSessions: 0
vismSessionGrpMgcName: abc
vismSessionGrpSwitchFails: 0
vismSessionGrpSwitchSucesses: 0
Related Commands
group-num Identifying session group number for which you want to display t he PRI back ha ul
configuration data. It can be in the range from 1 to 16.
Command Description
addsesgrp Adds a PRI backhaul session group between a VISM card and a call agent.
delsesgrp Deletes a PRI backhaul session group.
dspsesgrps Displays data about all PRI backhaul session groups.