5-466
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dspxgcpcon
dspxgcpcon
To display the attributes associated with a call agent established connection, use the dspxgcpcon
command in the VoIP switching/trunking and switched AAL2 PVC operating modes.
dspxgcpcon conn-id display-level
Syntax Description
Command Modes VoIP switching/trunking and switched AAL2 PVC
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the abbreviated level of attributes associated with the call agent
identified by the connection identification number 4C5B are displayed:
dspxgcpcon 4c5b 1
*********************************************************
Attributes of Connection ID: 4c5b
*********************************************************
Call ID = C0011
Endpoint Name = vism/T1-1/1
Line Number = 1
Connection ID = 4c5b
Admitted Codec = PCMA
Admitted Pkt. period = 10 ms
Connection Mode = sendrecv
Echo Cancellation = FALSE
Type of Service = 0xa0
Network Type = IP
Remote Address Type = Invalid (0)
Continuity Test = FALSE
Loopback = FALSE
Local RTP Port = 49556
Remote RTP Port = 49544
Remote RTP Port Count = 1
Remote Address =64.68.18.1
MGC Domain Name = mgc1
MGC IP Address = Unknown
MGC UDP Port = 2427
Port in Notified Entity = FALSE
Protocol Version = MGCP 0.1
Silence Suppression = FALSE
SID = TRUE
VAD Timer = 250 ms
CAS Type = None
conn-id Connection identification number. It can be in the range of hexadecimal numbers
from 0 to f.
display-level Detail level of display. It can be one of the following values:
•1 = Abbreviated display
•2 = Detailed display