5-356
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
dsplapdtrunkpvc
dsplapdtrunkpvc
To display the assigned permanent virtual circuit (PVC) trunk type that carries Link A cce ss Prot ocol
D channel (LAPD) trunk messages for the current VISM car d, use the dsplapdtrunkpvc command in
the VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking operating modes.
dsplapdtrunkpvc
Syntax Description This command has no arguments or keywords.
Command Modes VoIP switching/trunking, switched AAL2 PVC, and AAL2 trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that the control PVC trunk type carries LAPD trunk messages for the
current VISM card:
dsplapdtrunkpvc
Lapd Trunk PVC Carrier: Control
Related Commands Command Description
addlapdtrunk Adds an LAPD trunk to a specific VISM card line.
addrtpcon Adds a static RTP VoIP trunking connection.
addrudptrunk Adds an ISDN PRI backhaul RUDP session for an LAPD trunk connection.
clrrtpcnt Clears the RTP counters (statistics) for a specific static RTP connection.
cnflntrunkcond Enables or disables line conditioning on a VISM card line if a network alarm
is encountered.
cnfrtpcon Modifies an existing static RTP VoIP trunking connection.
cnfrudptrunkrmtip Modifies the remote IP address of VISM used in the ISDN PRI backha ul R UDP
trunk for a specified session.
dellapdtrunk Deletes an LAPD configured line.
delrtpcon Deletes a static RTP VoIP trunking connection.
delrudptrunk Deletes an ISDN PRI backhaul RUDP session that is associated with an LA PD.
dsplapd Displays data about an LAPD.
dsplapdtrunks Displays the configuration data of all LAPD trunks.
dsprtpcnt Displays the bearer counters (statistics) for a specific RTP VoIP trunking
connection.
dsprtpcon Displays the configuration data of a specific static RTP VoIP trunking
connection.
dsprtpcons Displays the configuration data of all static RTP VoIP trunking connections.