5-163
Cisco VISM Installation and Configuration Guide
Release 3.0, Part Number OL-2521-01 Rev. D0, June 2004
Chapter5 CLI Commands
cnflapdwinsize
cnflapdwinsize
To configure a maximum number of outstanding (unacknowledged) I-frames, use the cnflapdwinsize
command in the VoIP switching/trunking operating mode.
cnflapdwinsize line-num ds0-num iframe-num
Syntax Description
Command Modes VoIP switching/trunking
Usage Guidelines Follow standard CLI procedures for this command.
Examples The following example shows that line 2, DS0 12 is configur ed with a n LA PD w ind ow size of 10 —a
maximum number of 10 I-frames can be accumulated b ef ore s end i ng an a ck nowledgm en t:
cnflapdwinsize 2 12 10
Related Commands
line-num Line number of the D channel to be configured. In the range from 1 to 8.
ds0-num DS0 number that was specified in the addlapd command. It can be a value from one
of the following ranges:
1 to 24 for T1 lines
1 to 31 for E1 lines
iframe-num Maximum number of outstanding (unacknowledged) I-frames tha t c an b e
accumulated before sending an acknowledgment. It can be in the rang e from 1 to 127.
Command Description
cnflapdretrans Configures a maximum number of frame retransmissions for a previously added
LAPD.
cnflapdtimer Configures two LAPD timers for a previously added LAPD.
cnflapdtype Configures the various types of LAPD stacks for a previously added LAPD.